manja
06-29 03:16 PM
To add my wife I'll need to pay 500+ per month which is pretty expensive. That's why I was looking for outside options. I found some on ehealthinsurance but none of them cover pregnancy.
wallpaper To use any of the clipart
av2307
09-03 03:18 PM
By the way - harrdr , I'm exactly in the same situation - PD May '08 , I-140 approved and i have a very enticing full time offer from a Major financial firm. But i don't want to jeopardize my chances to get a GC in the next couple of yrs ( given that EB2 dates have moved forward substantially last month).
Please keep me in loop in case you find anything else about the situation. I'll do the same.
TIA
-A
Please keep me in loop in case you find anything else about the situation. I'll do the same.
TIA
-A
smmakani
07-09 11:04 AM
CP Filed at Mumbai Embassy - India
PD: Oct 2003
I would suggest to start a separate thread to know who are CP filers in the forum and then we can have a conf with IV to discuss what needs to be done. We can also send the private message to each to share our contact info.
PD: Oct 2003
I would suggest to start a separate thread to know who are CP filers in the forum and then we can have a conf with IV to discuss what needs to be done. We can also send the private message to each to share our contact info.
2011 #23815 Clip Art Graphic of a
jayleno
12-12 12:56 PM
If the reason for the denial is the company financial situation and not been audited, I dont know how EB3 will solve the problem. Are you already being paid the amount they specified in the LC?
I think you should consult an independant attorney and get an opinion rather than trusting your company's lawyer.
My PERM was applied in Nov 2007 and 140 in early- mid 2008.
It was applied under EB2 category (Masters Degree). Currently, I'm on the 5th yr of my H1. My 6th year starts in Feb 2009.
Had received an RFE to which we responded but it still got denied. The main reason being the company has a loss and the books are not audited.
My lawyer suggested that we appeal the deinal and start a new PERM in EB3 category.
Are these my only option to make sure I can renew my H1 after the 6th year? Any suggestions?
I'm confused and scared at the same time. Not sure what to do..
please suggest me all the options available to me.
Thanks!
I think you should consult an independant attorney and get an opinion rather than trusting your company's lawyer.
My PERM was applied in Nov 2007 and 140 in early- mid 2008.
It was applied under EB2 category (Masters Degree). Currently, I'm on the 5th yr of my H1. My 6th year starts in Feb 2009.
Had received an RFE to which we responded but it still got denied. The main reason being the company has a loss and the books are not audited.
My lawyer suggested that we appeal the deinal and start a new PERM in EB3 category.
Are these my only option to make sure I can renew my H1 after the 6th year? Any suggestions?
I'm confused and scared at the same time. Not sure what to do..
please suggest me all the options available to me.
Thanks!
more...
akilaakka
07-26 09:01 AM
The link is not working.
mdmd10
09-14 04:01 PM
That last question on the bills was from me!
Thanks for answering
Thanks for answering
more...
anishNewbie
09-11 11:38 AM
@vsuri , @prasadn, @eb2_mumbai
Thanks guys for sharing your exp.. this is what i was talking about.. it gives me some confidence starting my GC...Any1 out there please share your experience on EB2 filed as MS + 0
Could you guys tell me that ur advertisement/job requirements -- had any alternate education in it..like BS +5 as per the norm..
If yes, then it would be gr8.. if u can have a look at ur LC/9089 form and let us all EB2 aspirants know that..what did you specify in your H section..at 4(as min requirements-- MS or BS +5) and what as alternate requirements(8-A,C)
Did any of you guys, or any1 here had to prove Business Necessity when they filed EB2..
Thank uuuuuu.....:D (P.S. looks like we are going to beat NZ todayy)
Thanks guys for sharing your exp.. this is what i was talking about.. it gives me some confidence starting my GC...Any1 out there please share your experience on EB2 filed as MS + 0
Could you guys tell me that ur advertisement/job requirements -- had any alternate education in it..like BS +5 as per the norm..
If yes, then it would be gr8.. if u can have a look at ur LC/9089 form and let us all EB2 aspirants know that..what did you specify in your H section..at 4(as min requirements-- MS or BS +5) and what as alternate requirements(8-A,C)
Did any of you guys, or any1 here had to prove Business Necessity when they filed EB2..
Thank uuuuuu.....:D (P.S. looks like we are going to beat NZ todayy)
2010 Elf Ear Clip Art - Free Clip
softwareguy
09-08 12:47 PM
Well, this is nothing new, in State Governments so many times they mandate that only companies that listed in that state have right to big contracts. What small women owned, disadvantages, veteran owned companies do is provide a front to big operators like Accenture, IBM. At times then the small company hires a Senior Manager and finally it becomes all IBM operation from India or Phillipines.
On other times the State mandates all work be done inside the State. Then you have H1 and L1 visa holders. This is business as usual.
Actually it is quite a decent engagement practice. State owned companies get a piece of the big cake and get a chance to learn from big players and state gets the quality work at a fairly decent rate. So it is all win-win. At times they mandate "In State" workers only - so that it helps the local economy... that is where the Infosys & Wipros might hurt a bit, as the cost to put guys in NYC versus Ohio from Bangalore is identical but billing rate advantage between NYC and Ohio is vastly different and they might have hire locally.
On other times the State mandates all work be done inside the State. Then you have H1 and L1 visa holders. This is business as usual.
Actually it is quite a decent engagement practice. State owned companies get a piece of the big cake and get a chance to learn from big players and state gets the quality work at a fairly decent rate. So it is all win-win. At times they mandate "In State" workers only - so that it helps the local economy... that is where the Infosys & Wipros might hurt a bit, as the cost to put guys in NYC versus Ohio from Bangalore is identical but billing rate advantage between NYC and Ohio is vastly different and they might have hire locally.
more...
sammyb
09-04 05:31 PM
I already got a denial of my wife's application and had to pay $585 for the MTR :mad: ... that would be a nice source of revenue for the agency...
They have to advance the dates down the line to get more fees in order to keep the dumdums employed at the USCIS.........
That does not mean it translates into GCs.....its just more people get EADs and APs and continued revenue for USCIS.
I also won't be surprized if the fees go up in the next round.
Also until the CIR is passed there is no way they will eliminate the backlog as that will mean giving up their "cash cows"===a.k.a "us".......
Here is what I beleive will happen until amnesty is enacted(whether we like it or not our fate is tied to the illegals):
1. Dates will be moved forward and backward randomly to get more fees from new and old suckers like us(everytime the dates move fwd they raise our hopes and we hang on longer).....they don't want us to leave...they just want us to keep paying for their jobs...so as Obama says......"keep the HOPE train alive" even if its not moving an inch.
2. Increase the fees.....
3. Increase the rate of denials: more denials mean more MTRs mean more revenue......
Its a business and you will do whatever to survive.........nothing personal........
They have to advance the dates down the line to get more fees in order to keep the dumdums employed at the USCIS.........
That does not mean it translates into GCs.....its just more people get EADs and APs and continued revenue for USCIS.
I also won't be surprized if the fees go up in the next round.
Also until the CIR is passed there is no way they will eliminate the backlog as that will mean giving up their "cash cows"===a.k.a "us".......
Here is what I beleive will happen until amnesty is enacted(whether we like it or not our fate is tied to the illegals):
1. Dates will be moved forward and backward randomly to get more fees from new and old suckers like us(everytime the dates move fwd they raise our hopes and we hang on longer).....they don't want us to leave...they just want us to keep paying for their jobs...so as Obama says......"keep the HOPE train alive" even if its not moving an inch.
2. Increase the fees.....
3. Increase the rate of denials: more denials mean more MTRs mean more revenue......
Its a business and you will do whatever to survive.........nothing personal........
hair Free Clipart of Ear
harrydr
05-05 09:22 PM
Just a follow up question:
Now that i have my I-140 approved for over an year now and never filed for 485, does the similar/same job/field apply in case of a job change or can i have a new job responsibility with a new employer and then port my PD based upon the approved 1-140 from previous employer?
Now that i have my I-140 approved for over an year now and never filed for 485, does the similar/same job/field apply in case of a job change or can i have a new job responsibility with a new employer and then port my PD based upon the approved 1-140 from previous employer?
more...
.jpg "clip art ear. keep an ear on")
hsm2007
09-20 08:58 PM
Yes I am going to consult either Murthy or Rajeev. But my problem is that my company which is a big corporate will only give a EVL based on the format that the company's attorney prepare. So even though I can consult Murthy but no way I will be able to use their advice as my current employer will only do what their attorney tells them.
I am in a fix as to what to do? My current employer is a big corporate and don't work with personal attorneys. And HR policies are also very stringent.
Even if I want I can't use Murthy/Rajeev/Ron to respond to this RFE.
So confused what to do
I am in a fix as to what to do? My current employer is a big corporate and don't work with personal attorneys. And HR policies are also very stringent.
Even if I want I can't use Murthy/Rajeev/Ron to respond to this RFE.
So confused what to do
hot Cartoon Clipart Ear Holding
Jaime
09-14 02:30 PM
bump
more...
house #23819 Clip Art Graphic of a
gc_eb2_waiter
02-13 02:00 PM
Help IV Help U
tattoo Cartoon Clipart Ear Super Hero
beemboy
10-31 10:33 AM
Guys, I need to reschedule visa appointment through the vfs website. I understand we have to cancel our appointment to reschedule; However, I am not sure if we have to fill out all the applications ( DS-156 & DS-157 ) again?
Did anyone go through this? Please let me know.
Did anyone go through this? Please let me know.
more...
pictures #23797 Clip Art Graphic of a
sjhugoose
February 15th, 2004, 05:54 PM
I have a Sony DSC F717. I got it to photograph model trains, so it is almost lways in macro mode. Frequently, the image blurs toawrds the back, even when set at the highest F-stop. The subject is usially about 5-12 inches away from the camera, depending on the model I am photographing. The models are about an inch high and up to 10 inches long.
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
Your experiencing an effect called Depth of Field(DOF). This is commen and usally you want to minimize it for effect but not in your case.
You will need to learn to use a DOF calculator, there is one on this site but it does not include the 2/3" sensor sive you camera has. A better one for you right now may be this calculator here: http://www.dpreview.com/reviews/nikoncp5700/page2.asp
Using this you can determine the distance you need, focal length and distance to subject to obtain the desired DOF. Currently on the wide end of your camera, you'll need to move about a 1.5 feet from the focus point with f8 to get the DOF you desire. If you get the WA adaptor you'll be able to move closer to about .9 feet from the focus point and still obtain the DOF you desire.
You'll never be able to be within 5 inches from the object and obtain the DOF you desire, it simply is not possible with you camera. As to which WA adaptor to get? I don't know. I've never used anything of the sort so I can not answer that question for you.
Scott
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
Your experiencing an effect called Depth of Field(DOF). This is commen and usally you want to minimize it for effect but not in your case.
You will need to learn to use a DOF calculator, there is one on this site but it does not include the 2/3" sensor sive you camera has. A better one for you right now may be this calculator here: http://www.dpreview.com/reviews/nikoncp5700/page2.asp
Using this you can determine the distance you need, focal length and distance to subject to obtain the desired DOF. Currently on the wide end of your camera, you'll need to move about a 1.5 feet from the focus point with f8 to get the DOF you desire. If you get the WA adaptor you'll be able to move closer to about .9 feet from the focus point and still obtain the DOF you desire.
You'll never be able to be within 5 inches from the object and obtain the DOF you desire, it simply is not possible with you camera. As to which WA adaptor to get? I don't know. I've never used anything of the sort so I can not answer that question for you.
Scott
dresses Human ear Vector Clip art
ashwinicool67
04-27 07:18 PM
Hello,
I have been on H1 for last 3 years and had applied for 485 last july as dependant for my spouse's AOS. My spouse is primary applicant for 485. I have my EAD also. I am worried that I may get RFE if I file for an H1 extension. If I am not able to respond to RFE and my H1 extension gets denied will this affect my I-485 in anyway. I am wondering whether or not to apply for H1 extension and just use my EAD.
I have been on H1 for last 3 years and had applied for 485 last july as dependant for my spouse's AOS. My spouse is primary applicant for 485. I have my EAD also. I am worried that I may get RFE if I file for an H1 extension. If I am not able to respond to RFE and my H1 extension gets denied will this affect my I-485 in anyway. I am wondering whether or not to apply for H1 extension and just use my EAD.
more...
makeup more clip art ear. more
WAIT_FOR_EVER_GC
06-21 02:04 PM
suggestions? ^^^^^^^
1) Read the requirement of EB2. Find out who are eligible in this category (Experience and bla bla bla)
Masters Degree, Managerial Position, Bachelor + 5 years are eligible. I am saying this because my friends have applied in these three categories to be eligible for eb2.
2) Your new Labor (PERM) in Eb2 might take up 8-10 months.
3) Apply I-140, I do not know if we have Premium Processing for it.
4) Once I-140 is Approved you can port the EB3 priority date to Eb2.
In your case 04 Eb3 will be now 04 Eb2.
The I -485 will have the old priority date 04 Eb2.
Most of the porting that I have heard is done by jumping ship. You ask your new employer to file in Eb2 and after your I-140 is approved you apply the old priority to EB2.
1) Read the requirement of EB2. Find out who are eligible in this category (Experience and bla bla bla)
Masters Degree, Managerial Position, Bachelor + 5 years are eligible. I am saying this because my friends have applied in these three categories to be eligible for eb2.
2) Your new Labor (PERM) in Eb2 might take up 8-10 months.
3) Apply I-140, I do not know if we have Premium Processing for it.
4) Once I-140 is Approved you can port the EB3 priority date to Eb2.
In your case 04 Eb3 will be now 04 Eb2.
The I -485 will have the old priority date 04 Eb2.
Most of the porting that I have heard is done by jumping ship. You ask your new employer to file in Eb2 and after your I-140 is approved you apply the old priority to EB2.
girlfriend ear clipart
nandakumar
01-18 04:40 PM
I'm the other voter,
Guys, it is the time to show up your support and contribute to this effort.
I only see one vote and that too mine on the attendance poll above.
Don't let anyone take your vote and your voice for granted.
Guys, it is the time to show up your support and contribute to this effort.
I only see one vote and that too mine on the attendance poll above.
Don't let anyone take your vote and your voice for granted.
hairstyles clip art ear. keep an ear on
gceb3holder
02-27 08:09 AM
Right, the problem is: I do travel a lot and that makes a part time job difficult to find....
Other thing, the 6 months, is counted from the receipt date or the approval date?
Other thing, the 6 months, is counted from the receipt date or the approval date?
ita
01-15 10:30 PM
^^
visafreedom
07-03 11:15 AM
Well, here are the thoughts.
American Govt only listens when it sees an economic impact. Get thousands of such workers to not work a day, I am sure it would mean a huge economic impact. This is sending a signal that we dont tolerate this "pseudo-slavery" and that today we dont work a day but tomorrow we will be forced to leave this country (I know already several people who have done that and it is becoming more and more common for people to abstain from coming to this land of opportunity as the system is now less favorable)
If hundreds of thousands dont go to work, congress, corporates, press - the whole gamut would become sensitive to the issue. This is one way you can get them to lobby for our demands.
Taking out rally is also a very good way of doing it however if you did this in one place, the turnout will not be as impressive. Doing it in multiple cities needs an organization.
Bottomline, whatever you do, show solidarity, resolve, unity. That has never happened within this affected group of workers.
American Govt only listens when it sees an economic impact. Get thousands of such workers to not work a day, I am sure it would mean a huge economic impact. This is sending a signal that we dont tolerate this "pseudo-slavery" and that today we dont work a day but tomorrow we will be forced to leave this country (I know already several people who have done that and it is becoming more and more common for people to abstain from coming to this land of opportunity as the system is now less favorable)
If hundreds of thousands dont go to work, congress, corporates, press - the whole gamut would become sensitive to the issue. This is one way you can get them to lobby for our demands.
Taking out rally is also a very good way of doing it however if you did this in one place, the turnout will not be as impressive. Doing it in multiple cities needs an organization.
Bottomline, whatever you do, show solidarity, resolve, unity. That has never happened within this affected group of workers.
No comments:
Post a Comment